All other brand and product names are trademarks or registered trademarks of their respective companies.
The HAPSITE Smart Plus runs a Linux® Operating System. The source code for the Operating System is available from INFICON by request for a nominal operating fee.
Linux® is the registered trademark of Linus Torvalds in the U.S. and other countries. DisclaimerThe information contained in this manual is believed to be accurate and reliable. However, INFICON assumes no responsibility for its use and shall not be liable for any special, incidental, or consequential damages related to the use of this product.
Due to our continuing program of product improvements, specifications are subject to change without notice.
©2008 All rights reserved. Reproduction or adaptation of any part of this document without permission is unlawful.
meets the essential safety requirements of the European Union and is placed on the market accordingly. It has been constructed in accordance with good engineering practice in safety matters in force in the Community and does not endanger the safety of persons, domestic animals or property when properly installed and maintained and used in applications for which it was made.
In addition, this is to certify that this equipment has also been designed and manufactured, having regard to the state of the art, to ensure complies with the Protection Requirements of EMC directive 2004/108/EC.
A Technical Documentation File is also available for review by competent authorities and will be maintained for a period of ten years after the date on which the equipment was last manufactured. In additional to this file technical, safety, installation, maintenance and application related information concerning this equipment can also be found in the Operating Manual(s) for this product or product family.
Equipment Description: HAPSITE Smart Plus Portable GC/MS with or without wireless communications, including the HAPSITE Service Module, NEG Pump, Battery and AC to DC HAPSITE Adapter. Applicable Directives: 2006/95/EC (LVD) 1999/5/EC (R&TTE / EMC) (The required compliance statement concerning this directive can be found in Chapter 4 of this manual.) 2004/108/EC (General EMC) 2002/95/EC (RoHS) Applicable Standards – Units with wireless communications: Safety: EN 61010-1:2001 Emissions: ETSI EN 300 328-2 V1.4.1: 2003 (R&TTE Emissions)(ERM for equipment operating in the 2.4 GHz ISM band) ETSI EN 301 489-17 V1.2.1: 2002 (Flicker & Harmonics)
(ERM - Specific conditions for 2.4 GHz) EN 61326-1:1997/A1: 1998/A2: 2001 (Radiated & Conducted Emissions)
Class A: Emissions per Table 3 (EMC – Measurement, Control & Laboratory Equipment)
Immunity: ETSI EN 301 489-17 V1.2.1: 2002 (General EMI) (ERM - EMC - Specific conditions for 2.4 GHz)
RoHS: Due to the classification of this product it is currently exempt from the RoHS Wireless Restrictions: Countries Restrictions France Outdoor use limited to 10mW e.i.r.p. within the band 2454 to 2483.5 MHz. Italy If used outside of own premises, generalauthorization is required. Luxembourg General authorization is required for public service. Romania On a secondary basis. Individual license required. Austria, Denmark, Finland,
None Germany, Greece, Iceland, Ireland, Liechtenstein, Luxembourg, The Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, The United Kingdom
Applicable Standards – Units without wireless communications:Safety: EN 61010-1:2001 Emissions: EN 61326-1:1997/A1: 1998/A2: 2001 (Radiated & Conducted Emissions)
Class A: Emissions per Table 3 (EMC – Measurement, Control & Laboratory Equipment)EN 61000-3-2: 2000 (Harmonics) EN 61000-3-3: 1995/A1: 2001 (Flicker) Immunity: EN 61326-1:1997/A1: 1998/A2: 2001 (General EMC)
Class A: Immunity per Table A.1 (EMC – Measurement, Control & Laboratory Equipment) RoHS: Due to the classification of this product it is currently exempt from the RoHS CE Implementation Date: May 1, 2008 Authorized Representative: Duane H. Wright Operations Quality Manager, ISS INFICON Inc.ANY QUESTIONS RELATIVE TO THIS DECLARATION OR TO THE SAFETY OF INFICON'S PRODUCTS SHOULD BE DIRECTED, IN WRITING, TO THE VICE-PRESIDENT OF OPERATIONS AT THE ABOVE ADDRESS.
Revised 11/04/08 (Rev C)
meets the essential safety requirements of the European Union and is placed on the market accordingly. It has been constructed in accordance with good engineering practice in safety matters in force in the Community and does not endanger the safety of persons, domestic animals or property when properly installed and maintained and used in applications for which it was made.
In addition, this is to certify that this equipment has also been designed and manufactured, having regard to the state of the art, to ensure complies with the Protection Requirements of EMC directive 2004/108/EC.
A Technical Documentation File is also available for review by competent authorities and will be maintained for a period of ten years after the date on which the equipment was last manufactured. In additional to this file, technical, installation, maintenance and application information concerning this equipment can also be found in the Operating Manual(s) for this product or product family.
Equipment Description: SituProbe (when used with the HAPSITE Smart Portable GC/MS System) Applicable Directives: 2006/95/EC (LVD) 2004/108/EC (General EMC) 2002/95/EC (RoHS) Applicable Standards:Safety: EN 61010-1:2001 Emissions: EN 61326-1:1997/A1: 1998/A2: 2001 (Radiated & Conducted Emissions)
Class A: Emissions per Table 3 (EMC – Measurement, Control & Laboratory Equipment)Immunity: EN 61326-1:1997/A1: 1998/A2: 2001 (General EMC) Class A: Immunity per Table A.1 (EMC – Measurement, Control & Laboratory Equipment)
RoHS: Due to the classification of this product it is currently exempt from the RoHS
ANY QUESTIONS RELATIVE TO THIS DECLARATION OR TO THE SAFETY OF INFICON'S PRODUCTS SHOULD BE DIRECTED, IN WRITING, TO THE VICE-PRESIDENT OF OPERATIONS AT THE ABOVE ADDRESS.
Revised 11/04/08 (Rev C)
meets the essential safety requirements of the European Union and is placed on the market accordingly. It has been constructed in accordance with good engineering practice in safety matters in force in the Community and does not endanger the safety of persons, domestic animals or property when properly installed and maintained and used in applications for which it was made.
In addition, this is to certify that this equipment has also been designed and manufactured, having regard to the state of the art, to ensure complies with the Protection Requirements of EMC directive 2004/108/EC.
A Technical Documentation File is also available for review by competent authorities and will be maintained for a period of ten years after the date on which the equipment was last manufactured. In additional to this file, technical, installation, maintenance and application information concerning this equipment can also be found in the Operating Manual(s) for this product or product family.
Equipment Description: Headspace (when used with the HAPSITE Smart Portable GC/MS System) Applicable Directives: 2006/95/EC (LVD) 2004/108/EC (General EMC) 2002/95/EC (RoHS) Applicable Standards:Safety: EN 61010-1:2001 Emissions: EN 61326-1:1997/A1: 1998/A2: 2001 (Radiated & Conducted Emissions)
Class A: Emissions per Table 3 (EMC – Measurement, Control & Laboratory Equipment)Immunity: EN 61326-1:1997/A1: 1998/A2: 2001 (General EMC) Class A: Immunity per Table A.1 (EMC – Measurement, Control & Laboratory Equipment)
RoHS: Due to the classification of this product it is currently exempt from the RoHS
ANY QUESTIONS RELATIVE TO THIS DECLARATION OR TO THE SAFETY OF INFICON'S PRODUCTS SHOULD BE DIRECTED, IN WRITING, TO THE VICE-PRESIDENT OF OPERATIONS AT THE ABOVE ADDRESS.
Revised 11/04/08 (Rev B)
WARRANTY AND LIABILITY - LIMITATION: Seller warrants the products manufactured by it, or by an affiliated company and sold by it, and described on the reverse hereof, to be, for the period of warranty coverage specified below, free from defects of materials or workmanship under normal proper use and service. The period of warranty coverage is specified for the respective products in the respective Seller instruction manuals for those products but shall not be less than two (2) years from the date of shipment thereof by Seller. Seller's liability under this warranty is limited to such of the above products or parts thereof as are returned, transportation prepaid, to Seller's plant, not later than thirty (30) days after the expiration of the period of warranty coverage in respect thereof and are found by Seller's examination to have failed to function properly because of defective workmanship or materials and not because of improper installation or misuse and is limited to, at Seller's election, either (a) repairing and returning the product or part thereof, or (b) furnishing a replacement product or part thereof, transportation prepaid by Seller in either case. In the event Buyer discovers or learns that a product does not conform to warranty, Buyer shall immediately notify Seller in writing of such non-conformity, specifying in reasonable detail the nature of such non-conformity. If Seller is not provided with such written notification, Seller shall not be liable for any further damages which could have been avoided if Seller had been provided with immediate written notification.
THIS WARRANTY IS MADE AND ACCEPTED IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, WHETHER OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE OR OTHERWISE, AS BUYER'S EXCLUSIVE REMEDY FOR ANY DEFECTS IN THE PRODUCTS TO BE SOLD HEREUNDER. All other obligations and liabilities of Seller, whether in contract or tort (including negligence) or otherwise, are expressly EXCLUDED. In no event shall Seller be liable for any costs, expenses or damages, whether direct or indirect, special, incidental, consequential, or other, on any claim of any defective product, in excess of the price paid by Buyer for the product plus return transportation charges prepaid.
No warranty is made by Seller of any Seller product which has been installed, used or operated contrary to Seller's written instruction manual or which has been subjected to misuse, negligence or accident or has been repaired or altered by anyone other than Seller or which has been used in a manner or for a purpose for which the Seller product was not designed nor against any defects due to plans or instructions supplied to Seller by or for Buyer.
This manual is intended for private use by INFICON® Inc. and its customers. Contact INFICON before reproducing its contents.
NOTE: These instructions do not provide for every contingency that may arise in connection with the installation, operation or maintenance of this equipment. Should you require further assistance, please contact INFICON.
